Hydraulic hoist 1000

Complete solution

The hoist is fitted on the crane complete with wire rope, wire sheaves, swivel hook with counterweight, control valve section, hose kit, stowing bracket, and safety equipment.

Ready to work

The HMF hoist solution and wire routing for 6-9 tm cranes offers the possibility of unfolding and folding the crane with the wire rope, wire sheaves, counterweight and hook fitted.

Electronic wire protection system (EWPS)

EWPS is always included when you buy an HMF crane with hoist. The safety system, RCL, monitors the crane and stops the crane at:

• Maximum wire pull (overload)
• At least 3 winds of wire left on the drum

Hoist auto-ease (HAE)

When operating the “extension - out” movement, the hoist automatically eases with a fixed, slow speed. The HAE system protects the wire rope against unnecessary high impact in the event of a safety stop.

HAE makes working with a hoist safer and faster, because it allows the operator to focus on the current lifting task.

When you lift with a hoist, you often work in high positions where your visibility is reduced - in this case, the HAE system will help you avoid unnecessary interruption.

This system is delivered on all RCS-cranes with hoist.

Technical data

Theoretical maximum wire pull per layer:

1st layer = 1100 kg
2nd layer = 1000 kg
3rd layer = 920 kg

Wire rope speed per layer at 20 l/min (max. load):

1st layer = 16 m/min
2nd layer = 17.5 m/min
3rd layer = 19 m/min
Standard wire rope: Ø8 mm