Hydraulic hoist 2500

Complete solution

The hoist is fitted on the crane complete with wire rope, wire sheaves, swivel hook with counterweight, control valve section, hose kit, stowing bracket, and safety equipment.

On cranes equipped with fly-jib the lifting capacity of the hoist is reduced corresponding to the capacity of the fly-jib. It will to some extent be necessary to mount/dismount various roller guides and wire sheaves when folding/unfolding the crane.

Electronic wire protection system (EWPS)

EWPS is always included when you buy an HMF crane with hoist. The safety system, RCL, monitors the crane and stops the crane at:

• Maximum wire pull (overload)
• At least 3 winds of wire left on the drum

Hoist auto-ease (HAE)

When operating the “extension - out” movement, the hoist automatically eases with a fixed, slow speed. The HAE system protects the wire rope against unnecessary high impact in the event of a safety stop.

HAE makes working with a hoist safer and faster, because it allows the operator to focus on the current lifting task.

When you lift with a hoist, you often work in high positions where your visibility is reduced - in this case, the HAE system will help you avoid unnecessary interruption.

2-part snatch block doubles the lifting capacity

Hoist 2500 is available with 2-part snatch block for 10 mm wire that doubles the lifting capacity of the hoist thus halving the wire speed.

Technical data

Theoretical max. wire pull per layer:

1st layer = 2400 kg
2nd layer = 2250 kg
3rd layer = 2100 kg
4th layer = 1950 kg

Wire rope speed per layer at 60 l/min (max. load):

1st layer = 24 m/min
2nd layer = 25.5 m/min
3rd layer = 27.5 m/min
4th layer = 29 m/min
Standard wire rope: Ø10 mm