Hydraulic hoist 1500
Complete solution
The hoist is fitted on the crane complete with wire rope, wire sheaves, swivel hook with counterweight, control valve section, hose kit, stowing bracket, and safety equipment.
On cranes equipped with fly-jib, the lifting capacity of the hoist is reduced corresponding to the capacity of the fly-jib. It will to some extent be necessary to mount/dismount various roller guides and wire sheaves when folding/unfolding the crane.
Electronic wire protection system (EWPS)
EWPS is always included when you buy an HMF crane with hoist. The safety system, RCL, monitors the crane and stops the crane at:
- Maximum wire pull (overload)
- At least 3 winds of wire left on the drum
Hoist auto-ease (HAE)
When operating the “extension - out” movement, the hoist automatically eases with a fixed, slow speed. The HAE system protects the wire rope against unnecessary high impact in the event of a safety stop.
HAE makes working with a hoist safer and faster, because it allows the operator to focus on the current lifting task.
When you lift with a hoist, you often work in high positions where your visibility is reduced - in this case, the HAE system will help you avoid unnecessary interruption.
2-part snatch block doubles the lifting capacity
Hoist 1500 is available with 2-part snatch block for 10 mm wire that doubles the lifting capacity of the hoist thus halving the wire speed (Option).
Technical data
Theoretical max. wire pull per layer:
1st layer = 1500 kg
2nd layer = 1370 kg
3rd layer = 1260 kg
4th layer = 1170 kg
Wire rope speed per layer at 40 l/min (max. load):
1st layer = 22 m/min
2nd layer = 24 m/min
3rd layer = 26 m/min
4th layer = 28 m/min
Standard wire rope: Ø10 mm
Commerciële documenten
Klik om documenten te openen en downloaden. Login om alle documenten te zien.